Tensa Psolo is a monopod hammock stand made of our telescopic aluminum tubing, five segments tall, braced by two guylines.
One Psolo is enough where the site offers a support, such as a lone tree, vehicle, or rock feature. With no support, use two. Used as Psolo, each of Tensa4's four poles can hang a hammock. Each Psolo needs two guylines and two anchors. Tensa4 includes two of each: pack extras for every Psolo beyond the first. Any hammock suspension 10′ or longer can serve as a guyline.
The pole's construction varies, as shown below, and so do the guylines and anchors, but they are used the same way. This guide ships with Anchors & anchoring: read both before your first hang.




Hang the hammock from a self-tightening Tensa Toggle Loop resting on the fourth node up, or the third, never higher. Lark's-head the black ends of the guylines onto the pole immediately above the loop, resting on it. Never attach the hammock and guylines at different heights: even a small gap can bend the pole, requiring replacement segments.

From there, Psolo pitches like any monopod: set the anchors and lean the pole as Anchors & anchoring shows.
▶The segment above the hammock is your tarp extension: tie the ridgeline to the hole in the top. The hammock never hangs there.
Replacement segments are available by number.