Additional information
| Weight | 12 oz |
|---|---|
| Dimensions | 10 × 2 × 2 in |
| Guylines | None, 2 Amsteel, 2 webbing |
| Anchors | None, 2 Orange Screws, 2 30cm Boomstakes, 2 40cm Boomstakes, 2 Peggy Pegs |
Tensa4 to Tensa Solo conversion kit
$39.00 – $135.00
This kit provides the parts necessary to make one Tensa Solo pole from an available Tensa4 pole, plus a light drawstring carry bag. You’ll need two to hang without any trees or similar supports available. Order up to four kits to make up to four Tensa Solo poles from one Tensa4 stand.
Each pole requires two guylines and two anchors. We assume you will re-use those included with Tensa4 for the first pole. If you order two or more conversion kits with one Tensa4, be sure to order any extra guylines and anchors needed.
Kit consists of:
1 #5 tarp extension segment with tarp connector
1 Amsteel loop and ball
1 large foot which can be semi-permanently installed or easily removable
1 Tensa4 inner-foot removal tool
1 Lightweight drawstring bag
Optional:
Stakes and guylines.
Owning both a Tensa4 and one or more Solo conversion kits provides the flexibility of owning both systems, more cost effectively than owning them separately. To save weight and pack space, bring only the parts you know you need, or take everything to be ready for anything.
Check the Tensa Solo instructions for detail.
Clayton C. (verified owner) –
Though I haven’t tried the Solo Conversion Kit yet, the components look to be of high quality.
scott margraf (verified owner) –
Keith Heflin (verified owner) –
Staking adequately can be a challenge, but the product is top notch.
Cheryl Mitchell (store manager) –
Yes it can. My best advice is get creative. Using that I have hung on a couple of granite slabs with what most people would say was absolutely nothing to anchor to.
Nina Georgieva (verified owner) –
Tom H. (verified owner) –
Love it. Some fiddling was necessary on first use, but once dialed in it is excellent.
Anonymous (verified owner) –
Good service great product
Chris (verified owner) –
Very easy to use
SEISHI TOMITA (verified owner) –
I like the Tensa 4, but the only problem is that when I want to bonfire while sitting in a hammock, the Tensa 4 frame gets in the way, so I ordered the Tensa Solo Conversion kit without much expectation.
And the first time I used Tensa Solo, my expectations were betrayed.
Of course for the better. A sense of stability that cannot be imagined from that shape.
When you tighten the webbing, the pole is completely fixed, and it doesn’t shake or glare.
The day I first tried Tensa Solo, there was a dozen meters of wind.
I tried it, thinking that if I felt a danger, I would stop halfway through, but Tensa Solo overcame this wind!
From this, I was convinced that Tensa Solo would be a lifelong companion!
Michael Jung (verified owner) –
Great gear – changes the game for hammocking anywhere, anytime!
TOMOYASU EGAWA (verified owner) –
Kai R Olsen (verified owner) –
Just love it.
Bennett Kegan (verified owner) –
Came quick easy to use love it can set my hammock up anyway anywhere
Thomas B. (verified owner) –
I purchased two Solo conversion kits to use when canoeing. One many sites where we do most of our canoeing (Northeast US), it hard to find enough open area under two trees to hang one hammock, let alone two if my wife comes along. With the two conversion kits, we only need one tree and can hang two hammocks close enough to cover with our large tarp. These kits are small and light enough to bring along, even with multiple portages.
Steven C. (verified owner) –
With my Treez, Solos and a Tensa4, I now have enough equipment for my wife and both kids to hang.
Albert West (verified owner) –
Tensa is a great company to deal with, and their equipment works great!
Albert West (verified owner) –
I really enjoy this equipment, and Cheyrl was very helpful in providing information and the product I needed!
Davide Giovanni Maria Salvetti (verified owner) –
The Solo conversion kits work great, they let me hang everywhere.
Stephen Y. (verified owner) –
This is a nice, well thought out conversion kit. It makes it easy to convert from the Tensa 4 to the Tensa Solo.